For making electrical connections to microfluidic chips, Micronit offers a simple but effective solution: the Electrical Connection Kit. The kit can be used in combination with the Fluidic Connect chip holder and enables easy, plug-and-play connections to your microfluidic chip.
The Electrical Connection Kit contains 5 cables with a nut and probe (OD=0.76 mm) with receptable at one end, and a standard plug at the other end. The spring point in the probe has a diameter of 0.5 mm and a sharp angle of 70o.
Specifications
| Number of cables |
5 |
| Current rating |
3 A |
Maximum Voltage DC
AC |
30 V (handheld use)
60 V (handheld use) |
| Maximum operating temperature |
50 oC |
| Contact resistance probe |
30 mR |
Connector
Type |
Banana plug |
Cable
Length
Color
Wire Size (AWG) |
915 mm
black
22 |
Spring probe
Housing - material
Housing - plating
Contact tip - material
Contact tip - plating |
phosphor bronze
gold
beryllium copper
rhodium over nickel |
Isolation nut
Material
Thread |
PEEK
6-32 UNC |
The Electrical Connection Kit is specifically meant to be used as laboratory equipment.
For this product, you also need:
|
