Microreactor Chips
PURCHASE Now
The Fluidic Microreactor chips are available off the shelf and can be purchased in the Micronit webshop.
Fluidic Connect
The microreactor chips are compatible with Fluidic Connect, a user-friendly way to create a lab-on-a-chip set-up.
|
Micronit offers six different standard microreactor configurations. The microreactor chips have two inlets and one outlet. Two fluids can be injected separately and will mix by diffusion, without turbulence. The chemical reaction time of the fluids is determined by the pressure or the channel length.
The chips are made of borosilicate glass and are delivered in the Fluidic Slide, a plastic cartridge of 75 x 25 mm - the microslide standard - to be compatible with the Fluidic Connect 4515.
The table below gives the specifications of the microreactor chips.
|
Top Glass Layer (µm) |
Bottom Glass Layer (µm) |
Internal Volume (µl) |
Channel Width (µm) |
Channel Depth (µm) | |
|
FC_R150.332.2 |
1100 |
700 |
3.7 |
150 |
150 |
|
FC_R150.676.2 |
1100 |
700 |
7.6 |
150 |
150 |
|
FC_R50.332.2 |
1100 |
700 |
0.28 |
50 |
20 |
|
FC_R50.676.2 |
1100 |
700 |
0.56 |
50 |
20 |
|
FC_R50.332.3 |
1100 |
145 |
0.28 |
50 |
20 |
|
FC_R50.676.3 |
1100 |
145 |
0.56 |
50 |
20 |
PURCHASE NowThe Fluidic Microreactor chips are available off the shelf and can be purchased in the Micronit webshop.
Fluidic ConnectThe microreactor chips are compatible with Fluidic Connect, a user-friendly way to create a lab-on-a-chip set-up.