 |
Within the Fluidic Connect platform, Micronit offers different glass microfluidic chips. The chips are all supplied in the Fluidic Slide, a plastic cartridge of 75 x 25 mm - the microslide standard. The Fluidic Slide enables the chips to be compatible with the Fluidic Connect 4515 chip holder, and facilitates a convenient handling of the chips.
flowcells
These thin bottom flowcells are ideal for experiments such as cell, particle or DNA imaging. The 145µm bottom plate make these flowcells also suitable for confocal microscopy.
Droplet Generators Microfluidic droplet generators are excellent tools for generating highly reproducible microsized droplets with much higher precision and repeatability compared to conventional methods.
Microreactor Chips Chips with two inlets and one outlet. Two fluids can be injected separately and will mix by diffusion, without turbulence.
Cross Channel Chips Chips with two channels crossing each other (X-cross). Suitable for focus-flow applications or droplet generation.
Micromixer Chips Triple layer chips offering very short mixing times, ideally mixed conditions, and efficient mixing even at low pressures.
Chip Starter Packs Do you want to test different chips? The Micronit combination packs are an efficient solution to start your lab-on-a-chip experiments with different microfluidic chips.
Fluidic PROFast prototyping services based on a standard hole layout, compatible with the Fluidic Connect platform.